Printing stiffeners on corrugated board packaging to reduce environmental impact

Thesis defense by Maxime LEGAY on Monday, December 7, 2026, at 2:00 p.m.: Printing stiffeners on the surface of corrugated board packaging boxes: a bio-inspired approach to lightweighting packaging and optimizing resource consumption.

This PhD aims at reducing the environmental impact of corrugated board packaging boxes. The investigated approach consists in improving the mechanical performance-to-weight ratio of boxes through the printing of a rib network on their surface.

3D printing of polylactic acid (PLA) is employed to manufacture these rib networks. The mechanical behavior of boxes under compression is analyzed using digital image correlation. An algorithm for the optimization of rib networks has been developed, based on principal stress lines and on the use of the Tsai-Wu criterion. Boxes printed with rib networks generated this way showed a 1.92% increase in their box compression strength (BCT) for every 1% increase in mass.

The use of a lignocellulosic paste as a substitute of PLA is currently being investigated in order to make the approach more environmentally friendly.

Thesis Defense Committee

Thesis supervision/advising
Davide BENEVENTI, CNRS Res. Dir. (LGP2)

Isabelle DESLOGES, Lect.-Res. (Grenoble INP - Pagora, UGA / LGP2)

Jérémie VIGUIÉ, Res. Eng. (Grenoble INP - Pagora, UGA / LGP2)
Other members
Francis COLLOMBET, Prof. (Univ. Toulouse)

Laurence GIRAUD-MOREAU, Asso. Prof. (Univ. technologie Troyes)

Fazilay ABBES, Asso. Prof. (Univ. Reims Champagne-Ardenne)

Pierre DUMONT, Prof. (INSA Lyon)

Laurent ORGEAS, CNRS Res. Dir. (3SR)